12W LED Optimized Drivers

Key Features

Model	Output Voltage	Output Ampere	Dimmable	PF	Precision	Max Output	Power Efficiency	Application
12W	12~24VDC	Max. 500ma	No	≥0.95	±3%	10W	0.84	FCL4-12W-N/FCL4-A12W-N/FDL-D9070-8W-N/FDL-D13070-13W-N
	24~36VDC	Max. 350ma	No	≥0.95	±3%	12W	0.84
	36~42VDC	Max. 300ma	No	≥0.95	±3%	12W	0.84

Approved

UL8750, UL1310, UL48, CSA 22.2
CE , FCC, ROHS, IP66 compliant.

Warranty

2 years

Environmental

Operating temperature: -30 to +60°C
Storage temperature range: -40 to +85°C
Humidity (non-condensing): 5% - 95%RH
Cooling: Convection
Vibration Frequency: 5-55Hz/2g, 30 minutes
Impact resistance: 1g/s
MTBF@ 40OC: 531,000 hours @ Full Load per MIL-217F Notice 2
EMC: Compliant to CISPR 22 CLASS B, CISPR 14-1
CLASS B, GB4343. 1-2003, GB17625.1-2003

Features Benefits

High-performance, energy efficient and cost-effective led driving solutions for driving LEDs and lamps are best-in-class and can be used in a broad portfolio of applications ranging from room to automotive lighting, the activation of light sources, energy-saving lamps and light management systems. Always are designed to supply constant current for general lighting and industrial applications.

Drive Mode: Constant Current or Constant Voltage
Technology: PFC Off-Line Switch-Mode
Output Power: 20W Max.
Input Voltage: 100 to 277VAC, 47-63Hz
Number of Outputs: One
Output Voltages: 10VDC - 36VDC
Output Currents: 30mA - 700mA
Material: Black PC ABS Plastic
UL8750, UL1310, UL48, cUL, CE compliant
FCC Part 15 Subpart B, Class B compliant.
Water resistant potting and Dust Proof Design
NEMA4, For Dry, Damp, Wet Locations.
Compact, Lightweight Design.
Constant Voltage output from 10VDC to 36VDC
Safety Isolation between Primary and Secondar
Meets EN61000-3-2 & EN61000-3-3 Class C.

Physical Structure

Data Specifications

Input Voltage Range: 100--277V AC, 50/60Hz
Weight: 90 g, 160 g.
Operating Temperature Range: -20 to +40 degree Celsius
Storage Temperature Range: -20 to +85 degree Celsius
Overload Protection: 105...150%
Simple primary hook-ups, Class 2 outputs
Direct assembly on DIN-Rail;
Proven reliability, rugged housings;
Power factor: > 0.90 at full load 115v ac/ 230vac 60Hz.
Built-in EMI filter, low ripple noise;
Plug is available for north America, Europe etc. (2 pins round plug or 2 pin flat);
No minimum load, no load balancing and no dip switches;
Humidity (non-condensing): 5% - 95% RH
Constant current regulation: +-1% over input line variation;
Load regulation accuracy: +- 3%;
Leakage current: 300 uA typical;
Protection: output overload protection, constant current limiting, short circuit protection, auto Recovery;

Download Efile: Efile for LED Optimized Drivers.pdf