http://www.fobsun.com     sales@fobsun.com

Fobsun

User's Manual for Round LED Wall Washers-IP65

This manual includes important information about checking after receiving the product, cautions, working environment of the product, user's responsibilities and operation instructions, please read it carefully before you use the product.

Product Checking

1) Unpack and carefully examine the product.
2) Report any damage and save all packing material if any part is damaged during the transportation.
3) Do not attempt to use this device if it is damaged.

Cautions

1) This device shall be installed and operated by a qualified electrician or technician in accordance with all relevant local codes.
2) Risk of electric shock. Ensure that the power supply is off when wiring or soldering the sections of the device.
3) Do not use sharp tools near or on the surface of the device.
4) Do not plug them into power when the product is still in package.
5) Don't use anything to cover the fixture during application.
6) Don't use this product in close environment.
7) If this product appears to be damaged, do not attempt any operations, please contact your dealer.

Working Environment

This product is suitable for indoor and outdoor use, and applicable for both dry and damp environments.

User Responsibilities

It is the responsibility of the contractor, installer, purchaser, owner, and user to install, maintain, and operate the device in such a manner as to comply with all state and local laws, ordinances, and regulations.
Note: The instructions and precautions set forth in this user guide are not necessarily all-inclusive, all conceivable, or relevant to all applications, FOBSUN Electronics cannot anticipate all conceivable or unique situations.

Operation Instructions

Working Mode

Independent mode; DMX mode; Master/Slave mode

Functions & Setup

Independent mode

After pressing A four times (the first three times is the setup on DMX address) or B directly, light enters into independent mode: the digital LEDs show PXY, press A once, active digital LEDs move backward, you can choose function via X and parameter via Y: Press B, the corresponding flashing LED increases one bit (range: 1-9), please refer to the following picture:

Function and Parameter Sheet:

X Value

Y Value

1-static red

1-9 class gray degree

2-static green

1-9 class gray degree

3-static yellow

1-9 class gray degree

4-static blue

1-9 class gray degree

5-static purple

1-9 class gray degree

6-static cyan

1-9 class gray degree

7-static white

1-9 class gray degree

8-multicolor changing

1-9 class speed

9-single fading

1-9 class speed

A-multicolor fading

1-9 class speed

B-multicolor flashing

1-9 class speed

C-auto run

1-9 times circle

X refers to functions (the value is between 1 to C); Y refers to value of speed and gray degree for the functions (the value is between 1 to 9). When pressing buttons, please wait for about 10 seconds, then you can edit the mode of adjustment function, the digital LED stops flashing and to record the data.

DMX mode

DMX addressing When the digital LED is not flashing, press A, digital LED begins to flash, press A once, active digital LEDs move backward, you can start to edit the second digital LED; Press B, the corresponding flashing digital LED increases one bit (the value is between 1 to 9);
DMX channel instruction-3 channels available as following sheet:

CHANNEL 1

CHANNEL 2

CHANNEL 3

Data

Function

Data

Function

Data

Function

0-255

Brightness of Red

0-255

Brightness of Green

0-255

Brightness of Blue

Enter or quit DMX mode automatically once detecting valid signals.

Master/Slave mode

Choose any one light as the master for attaining auto online function, the operations are as follows: firstly, set the address of master as 001, others are set as slave (address can be any one except 001); Change function of the master (001) light, then all lights will work synchronously.
X refers to functions (the value between 1 to A); Y refers to value of speed and gray degree for the functions (the value between 1 to A).

Phone: 86-755-6118-7778 (English Service)    Fax: 86-755-6118-7077
Website:http://www.fobsun.com    Email:sales@fobsun.com
PrintClose