User's Manual for Flex LED Strips

This manual includes important information about checking after receiving the product, cautions, working environment of the product, user's responsibilities and operation instructions, please read it carefully before you use the product.

Product Checking

1) Unpack and carefully examine the product.
2) Report any damage and save all packing material if any part is damaged during the transportation.
3) Do not attempt to use this device if it is damaged.


1) This device shall be installed and operated by a qualified electrician or technician in accordance with all relevant local codes.
2) Risk of electric shock. Ensure that the power supply is off when wiring or soldering the sections of the device.

Working Environment

This flex LED strip is suitable for both indoor and outdoor applications.

User Responsibilities

It is the responsibility of the contractor, installer, purchaser, owner, and user to install, maintain, and operate the device in such a manner as to comply with all state and local laws, ordinances, and regulations.
Note: The instructions and precautions set forth in this user guide are not necessarily all-inclusive, all conceivable, or relevant to all applications, FOBSUN Electronics cannot anticipate all conceivable or unique situations.

Operation Instructions

1. You can clean the fingerprint on the surface by rags if necessary.
2. Don't connect the strips more than 3 Meters in series, or the light would be asymmetrical.
3. No burning. No more than 60 degree Celsius operation temperature or it would increase the brightness loss.
4. Don't connect the strip into high voltage or AC input. 12V DC input, red wire as positive pole and black as negative. (Golden positive and silvery negative if required).
5. You can bend the strip 180 degrees, but there should be some arc transitions. Please refer to the picture below.

Phone: 86-755-6118-7778 (English Service)    Fax: 86-755-6118-7077