http://www.fobsun.com sales@fobsun.com
Product details:
Product name: LED MODULE & STRIP
Stock number: /
Manufacturer/Supplier:
Address: F3 Building, Gonghe Gongye Road, Gushu Hongwang 3 area, Bao’an District, 518102, Shenzhen City£¬ China
Tel: +86-755-33914954
Fax: +86-755-33662930
Information Department: Health, Safety and Environmental Department
Emergency information: During normal hours the Health, Safety
and Environmental Department
Normal hours call Tel: +8675533662112
MSDS CODE: SZ100326003/EU
Chemical characterization:
Description: (CAS#)
/ |
LED |
54% |
/ |
PCB |
10% |
/ |
RESISTANCE |
5% |
/ |
PLASTIC |
30% |
/ |
WIRE |
1% |
Hazard description:
Not dangerous specially.
General information
Immediately remove any clothing soiled by the product.
After inhalation
Supply fresh air. If required, provide artificial respiration. Keep patient warm.
Seek immediate medical advice.
After skin contact
Immediately wash with water and soap and rinse thoroughly.
Seek immediate medical advice.
After eye contact
Rinse opened eye for several minutes under running water. Then consult a doctor.
After swallowing
Seek immediate medical advice.
Suitable extinguishing agents
Product is not flammable. Use fire fighting measures that suit the surrounding fire.
Protective equipment:
Wear self-contained respirator.
Wear fully protective impervious suit.
Person-related safety precautions:
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Measures for environmental protection:
Do not allow materials to be released to the environment without proper governmental permits.
Measures for cleaning/collecting:
Use neutralizing agent.
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Additional information:
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Handling
Information for safe handling:
Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
Ensure good ventilation at the workplace.
Information about protection against explosions and fires:
The product is not flammable
Storage
Requirements to be met by storerooms and receptacles:
No special requirements.
Information about storage in one common storage facility:
Do not store together with oxidizing and acidic materials.
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well sealed containers.
Additional information about design of technical systems:
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Components with limit values that require monitoring at the workplace: Not required.
Additional information: No data
Personal protective equipment
General protective and hygienic measures
The usual precautionary measures for handling chemicals should be followed.
Keep away from foodstuffs, beverages and feed.
Remove all soiled and contaminated clothing immediately.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
Breathing equipment:
Use suitable respirator when high concentrations are present.
Protection of hands: Impervious gloves
Eye protection:
Safety glasses
Tightly sealed goggles
Full face protection
Body protection: Protective work clothing.
General information
Form: Solid
Color: Black, white
Odor: Odorless
Change in condition
Melting point/Melting range: Not determined
Boiling point/Boiling range: Not determined
Sublimation temperature/start: Not determined
Flash point: Not applicable
Ignition temperature: Not determined
Decomposition temperature: Not determined
Danger of explosion: Product does not present an explosion hazard.
Explosion limits: Lower: Not determined
Upper: Not determined
Vapor pressure: Not determined
Density: Not determined
Solubility in/Miscibility with
Wate